A DEVELOPING PROJECT: INVESTIGATING FUTURE FORMS OF DESIGN AND TECHNOLOGY EDUCATION

Authors

  • Andrew Halliwell St Edward's School, UK
  • Amanda Mason Jarrow School, UK
  • Alison Hardy Nottingham Trent University
  • Ciaran Ellis Laurus Ryecroft School, UK

Keywords:

curriculum, teacher researcher, practitioner research, Delphi Study

Abstract

It is regularly reported at previous PATT conferences that design and technology (D&T) in England is in decline. Despite initiatives, new curricula and government lobbying, the D&T juggernaut seems to be on the brink of collapse (according to some), with lowering numbers of pupils studying D&T, fewer teachers, less resources, and low status in schools.

Pulling the D&T juggernaut back from the brink requires more than one approach and most of the recent ones have been led by national organisations. This paper reports on the first phase of a new project, led by practising teachers, that takes a new approach. In simple terms, the aim of the project is to redesign D&T, not so much the content but the curriculum delivery and framework.

We have started by identifying the unresolved issues that are causing curriculum tensions and incoherence in the D&T community.

In this paper we are reporting on the first phase of our design project, where we used a Delphi Study to identify the controversial D&T curriculum issues that need resolving before we can design a D&T curriculum. Nineteen teachers completed the first survey. Analysing of the survey data reduced the number of questions to 24. These were circulated to a self-selecting expert group (participants who completed the first survey). A second round of analysis has clarified that there are 18 unresolved questions and contentions issues that need to be debated.

The next step is to invite teachers to respond to these issues; these responses will then be shared in a publication, debated, and shaped into a curriculum design specification. Finally, teachers will be invited to share at a future workshop or conference their curriculum design ideas that meet this specification.

Author Biography

  • Alison Hardy, Nottingham Trent University
    Personal 

    Alison Hardy | 56 Stockerston Road, Uppingham, LE15 9RS |

    01572 823177 | 078 6655 7750 |

    Alison@alisonhardy.work | https://alisonhardy.work|

    Professional Progression January 2010 – present: Nottingham Trent University (NTU)

    May 2017 - ongoing

    Course Leader for MA Education (full time and part time). This has included:

    • Leading a complete revalidation of the course
    • Widening the MA team
    • Increasing completion and success rate
    • Improving PTES scores

    September 2013 – August 2014

    Acting Course Leader for Postgraduate Certificate in Higher Education.

    January 2010 - August 2014

    Course Leader BSc (Hons) Secondary Design and Technology Education (with QTS)

    My role has included:

    • Teaching on the PGCE and UG Design and Technology routes
    • Supervision of students on the MA Education dissertation modules
    • Professional Tutor linking with partnership schools

    Key contributions whilst at NTU:

    • Successful funding application and completion of four research projects at NTU
    • Revalidation of BA (Hons) to BSc (Hons) programme, which was highly commended by external assessor
    • Highest National Student Satisfaction scores for NTU in 2014 and 2015
    • Module Leader for Independent Study Project, largest module studied by all Secondary trainee teachers
    • Led three research projects with local partnership schools
    September 2009 – December 2009: Wrenn School, Wellingborough.

    Design and Technology teacher and additionally:

    • Subject tutor and mentor for overseas teachers
    October 2004 – January 2009: Tresham Institute of Further & Higher Ed.

    Director of Curriculum Development 14-19. During this period the role included responsibility for:

    • Strategic development of 14-19 education at the institute
    • Partnership, collaboration and maintaining effective links with LAs, LLSCs, schools, colleges, employers and other external bodies

    Key contributions included:

    • Co-author of successful Educational Case for a £60million building programme which included innovative 14-19 partnership solutions (new Corby campus)
    • Delivery of institute training for all teaching staff on classroom management, child protection and individual target setting for students
    January 2003 – August 2004: Lodge Park Technology College, Corby.

    Head of Technology

    Key contributions included:

    • Curriculum leader for D&T from Key Stage 3 – 5
    • D&T Lead Practitioner for the Specialist Schools and Academies Trust (SSAT)
    January 2000 – December 2003: Caistor Yarborough School

    Head of Department

    Led the department through a successful Ofsted inspection

    Mentored student teachers

    Implemented changes to GCSE courses

    September 1993 – December 1999: Farmor’s School, Fairford

    Joined as a newly qualified teacher in D & T. Following an Ofsted inspection in January 1997 I became Assistant Head of Department. During this period, I wrote and led a successful bid to be a pilot school for DATA’s CAD/CAM initiative.

    September 1992 – June 1993

    Held three concurrent part time posts at Pilsen University, Mikulasske Gymnazium (grammar school) and Skola 21 (middle school) teaching English, technical English and British culture.

    External Examiner September 2017 – ongoing

    BSc 4-year teacher education programme at University of Glasgow

    PGCE Design and Technology at University of Roehampton

    January – December 2014

    PGCE Design and Technology at University of Sunderland

    January 2013 – December 2014

    Undergraduate route into Design and Technology at University of Brighton.

    Education Institution Qualification Year

    Nottingham Trent University

    PhD ‘The value of design and technology edcuation’

    2017

    HEA

    Fellow of Higher Education Academy

    2011

    Nottingham Trent University

    PGCHE

    2011

    Learning & Skills Improvement Service

    Aspiring Principals and Senior Leaders Programme

    2009

    Sheffield Hallam University

    Master’s in design and Technology Education

    2004

    Brunel University

    B.Sc. (Hons) Design and Technology (2:1) & Cert.Ed.

    1992

    Professional Membership and Awards
    • British Education Research Association (full member)
    • Design and Technology Association (consultant member)
    • Teacher Training Design and Technology Award from the Design and Technology Association

     

    Consultancy & Boards  

    Trustee for the Design and Technology Association

    2017-2018

    Writing retreat facilitator for academics at Launde Abbey and other universities, including Universities of Liverpool and Northampton

    Current

    LSN Consultant on several projects including

    Creating the LSN 14-19 website

    16-19 development projects

    Co-author of ‘Providing a Flexible Curriculum at Key Stage 4’

    2006 - 2008

    Edexcel & OCR examiner & moderator for GCSE and A level D&T

    1997 - 2003

    Selection of relevant conferences and professional development attended:

    PATT 2016 Fostering the Creativity of Youth Around the Globe

    July 2017

    BERA 2016

    September 2016

    PATT 2016 Technology Education for 21st Century skills

    August 2016

    British Curriculum Forum (part of BERA)

    June 2016

    National STEM Centre Conference (presenter)

    May 2016

    D&TA Summer School (presenter and attendee)

    2015 & 2016

    Facilitator Training – academic writing retreats (self-funded)

    September 2015

    Key Publications  

     

    HARDY, A. (ed) 2021. Learning to teach design and technology in the secondary school: a companion to school experience (4th edition). London: Routledge

     

    HARDY, A., 2018. Using design fiction to teach new and emerging technologies in England. Technology and Engineering Teacher, 78 (4), pp. 16-20. ISSN 2158-0502

     

    HARDY, A.L., 2017. How did the expert panel conclude that D&T should be moved to a basic curriculum? In: E. NORMAN AND K. BAYNES, ed., Design Epistemology and curriculum planning

     

    HARDY, A. L., 2017. Rhetoric and Interpretation: The Values Students and Special Interest Groups Attribute to Design & Technology. In: PATT2017. Proceedings for the Technology & Engineering Education Fostering the Creativity of Youth Around the Globe. July 10-14, 2017. Philadelphia

     

    HARDY, A.L., 2017. The consequence of school performance measures – inequality of access and opportunity. Race Equality Teaching, 34(1), 39-43.

     

    HARDY, A. 2016. An assortment box of views: different perceptions of D&T’s purpose and structure. In: PATT2016. Proceedings for the Education for 21st Century skills conference. August 23-26, 2016. Utrecht

     

    HARDY, A., 2015. What’s D&T for? Gathering and comparing the values of design and technology academics and trainee teachers. Design and Technology Education: an International Journal, 20 (2), pp. 10-21.

     

    HARDY, A. and DAVIES, S., 2015. Teaching design and technology., Learning to teach design and technology in the secondary school: a companion to school experience. In: G. OWEN-JACKSON, ed., Learning to teach design and technology in the secondary school: a companion to school experience. London: Routledge, pp. 199-220.

     

           

    Further publications at http://bit.ly/2dm86E0

Additional Files

Published

2023-10-31

Similar Articles

31-40 of 88

You may also start an advanced similarity search for this article.